Products
-
CK1107 Swiss Type CNC Lathe
-
CT8 CNC Turning 4 Axis Universal Rotary Center
-
Vertical machining center CMV855E
-
Carbide drills with external cooling, 6.7 mm diameter
-
MVL1580 3 Axis Vertical Machining Center – Automatic CNC Machine | metal milling center
-
CNC tilting bed lathe TCK36A
-
Carbide drills with external cooling, 6.5 mm diameter
-
Carbide flat end cutter, 12mm diameter
-
GMB4030LX Five-axis bridge machining center with gantry structure
-
MVL1165 Large machining center
-
High quality machining center VMC1160
-
MVL1380 Fanuc CNC Vertical Milling Machining Center | DRC
-
Vertical machining center MVL1270E
-
VMC1370-High Precision Vertical Machining Center VMC1370
-
Vertical lathe VT1200
-
VMC1580-VMC1580 High Precision Vertical Machining Center
Vertical lathe VT1000
① Main spindle A2-11 with AC motor, drive power 18.5/22 kW, 1500 rpm
② 12-position servo turret
③ Chip conveyor and chip container
④ Hydraulic closed cylinder
⑤ FANUC 0i-TF plus control system
Description
marker
VT1000 Technical Parameters：
| Section | Name | Meaning |
|---|---|---|
| Work area | Turning diameter above bed | Φ1100mm |
| Max. turning diameter | Φ1000mm | |
| Max. cutting height (outer diameter) | 880 mm | |
| Max. table load | 1800 kg | |
| Recommended max. turning diameter | Φ600mm | |
| Chuck diameter (main spindle) | Φ610mm | |
| X-axis stroke | 880 mm | |
| Z axis travel | 880 mm | |
| Feed and movements | Fast movements along the X/Z axes | 20 / 20 m/min |
| Spindle | Spindle nose | A2-11 |
| Front bearing diameter | 200 mm | |
| Main drive | Engine power | 18.5 / 22 kW |
| Torque (high/low gear) | 730 / 3614 Nm | |
| Max. spindle speed (high/low gear) | 600 / 1500 rpm | |
| Revolver head | Number of positions | 12 positions |
| Tool holder standard | BMT65 | |
| Shank size | □32 mm / Ø50 mm | |
| Indexing time 30° (locked) | 4 sec | |
| Indexing time 30° (no locking) | 2 sec | |
| Positioning accuracy (VDI3441) | X/Z axis (positioning) | ≤6/8 µm |
| X/Z axis (repeatability) | ≤4 / 5 µm | |
| C-axis (positioning) | ≤20 arc. seconds | |
| Hydraulic system | Tank volume | 40 l |
| Max. pressure | 55 bar | |
| Cooling | Coolant tank volume | 600 l |
| Chip conveyor capacity | 170 l | |
| Pump power | 0.5 kW | |
| Pump capacity at 5 bar | 24 l/min | |
| Power supply | Installed power | max. 35 kVA |
| Voltage | 400 V | |
| Frequency | 50 / 60 Hz | |
| Fuses | according to VDE0100, 50 A | |
| Permissible voltage deviation | ±10% at 400 V | |
| Acceptance of the machine | Acceptance test | according to VDI3441 standard |
| Pneumatic system | Air pressure | 6 bar |
| Air consumption | 15 m³/h | |
| Environmental conditions | Room temperature | +15 to +35°C |
| Max. rel. air humidity | 75% | |
| Max. installation height above sea level seas | 1000 m | |
| Dimensions and weight | Weight of the machine with chip conveyor | ~14500 kg |
| Dimensions (L×W×H) | ~4210 × 2330 × 4200 mm | |
| Chip discharge direction | from the back |
VT1000Basic configuration：
| No. | ELEMENT | BRAND | NOTE |
| 1 | Control system | FANUC | 0i-TF |
| 2 | Tower | SAUTER | |
| 3 | Ball screw | PMI | |
| 4 | Linear Rolling Guide | PMI/HIWIN | |
| 5 | Propeller support bearings | NSK | |
| 6 | Bearing for spindle head | NSK | |
| 7 | Chuck and cylinder | Taiwan | |
| 8 | Cams* hard and soft | Autogrip | |
| 9 | Hydraulic station | Qiyang Senyou | |
| 10 | Lubrication | ISHAN | |
| 11 | Cooling pump | STAIRS | |
| 12 | Heat exchanger | Tongfei | |
| 13 | Chip conveyor | Homemade | |
| 14 | Chip container | Homemade | |
| 15 | Chip cart | Homemade | |
| 16 | RS232 | Taiwan |
About the company
Quality guarantee / Worldwide recognition / High technology
DRC machinery is a company that has consistently dedicated its activities to the field of metalworking. We specialize in the design, development, production, sales and after-sales service of high quality Chinese machine tools. Following the path of integrating production and trade, we feel the pulse of the times, constantly innovate and provide customers around the world with first-class quality products and services.
Quality guarantee
Over the years, DRC machinery has constantly expanded its product line and strictly produces various models of advanced CNC machinery in accordance with CE standard. The product range includes: CNC lathes, CNC machining centers, CNC gantry machining centers, horizontal machining centers, five-axis machining centers, turn-mill combination machines, vertical lathes, precision automatic lathes (bar feed), tube threading lathes and other specialized lathes machines. The company is certified according to the ISO 9001 quality management system and has more than 10 national patents.
Worldwide recognition
contact us
Related Popular Products
HT6L-High Precision CNC Machine
HT6L CNC machine - Open up new processing horizons with advanced technologies! 1. High precision and productivity Accuracy up to 0.005mm and moving speed up to 30m/min for efficient processing. 2. Multifunctional 12-position servo turret and hydraulic tailstock for machining parts up to 500mm. 3. Reliability and cost-effectiveness High-quality components from world brands (FANUC, SAUTER) for durability and minimal maintenance costs.
Gantry machining center GMF4019T
Model GMF4019T Options Unit of measurement Table size 4000X1600 mm Door width 1900 mm Table load 12 T T-slot width 9-22×160 mm Processing range X-axis stroke 4000 mm Y-axis stroke 1900 mm Z-axis stroke 900 mm Distance from spindle end to table 150-1050mm Spindle Taper Bore Type BT50 Nozzle Specification P50T-1-MAS403(45°) X-Axis Rapid Stroke 10m/min Y-Axis Rapid Stroke 12m/min Z-Axis Rapid Stroke 10m/min System Configuration FANUC Oi MF 1 package Motor Configuration X-Axis Motor α iF40
High precision Swiss lathe RC385
1. DRC's RC385 Swiss lathe uses high-performance high-density cast iron parts and imported precision components, with spindle runout ≤2μm and each axis repeat positioning accuracy ≤3μm. 2. Swiss lathe RC385 supports 8-axis connection with FANUC/SYNTEC CNC system, can quickly switch between bushing/no-bushing processing modes, and is suitable for turning, milling and drilling processing of composite materials. 3. The RC385 Swiss lathe is equipped with radial power tools and various accessories. It is CE/ISO certified and provides high precision machining solutions for aerospace, precision parts and other fields.
GMF2213T Gantry Machining Center
1.Temperature To keep the machining accuracy of the machine within the standard range, it is necessary to ensure that the constant temperature is between 17-25°C and the temperature difference from the ground to the highest point of the machine is kept within ±2°C! Humidity Continuous: 75% or less (non-condensing) Short time: 95% or less (non-condensing) Altitude Below 1000m Installation Conditions To ensure high precision and performance of the equipment, the foundation should be made in strict accordance with the foundation map provided by the seller (refer to the foundation map for specific production requirements) The installation location of the equipment should be away from direct sunlight, sources of vibration (stamping equipment, automobile and railways, etc.) and heat sources (furnaces, heaters, radiation, etc.), away from high-frequency generators, welding machines, etc., to avoid machine production failure or loss of machine precision. Air source requirements Air supply pressure ≥ 0.6 MPa, and the filtration accuracy is 100 microns. Although the machine is equipped with an air filter, the source of compressed air should be as free from moisture as possible. To ensure the normal operation of the equipment, if the compressed air of the air source does not meet the requirements of the air source, it is recommended to add another set of air source purification device (drying, oil removal, filtration) before taking out the machine. Water content in the air source will cause damage to precision components such as spindles and grid scales (component damage caused by this reason is not covered by the warranty), which must be strictly controlled! Power supply 3-phase 380V±10%; 50H Z If the voltage in the area of use is unstable, the machine must be equipped with a stable power supply to ensure the normal operation of the machine. Power requirements Power supply power 55 kVA Recommended power wire diameter: 25 mm2. Switching capacity: 160A Grounding Good grounding is required, each machine is recommended to be grounded separately, the grounding wire is copper wire, the diameter of the wire should not be less than 10 square mm, and the grounding resistance is less than 4 ohms
Vertical machining center DRC MX650 – high-precision CNC with delivery to the Russian Federation
DRC MX650 vertical machining center maintains the advantages of traditional CNC routers：this center has high rigidity of the base, symmetrical structure and stable operation. However, it is equipped with a five-axis rotary table（which simultaneously increases the versatility and efficiency of processes）, as well as the concept of dynamic rigidity - this function optimizes the moving parts of the equipment and further increases its stability. The DRC MX650 vertical machining center features high torque and fast response, making it ideal for machining applications in a variety of applications including automotive, mold making and specialty equipment manufacturing. The design of the DRC MX650 Vertical Machining Center includes the following elements: boat seat（providing X-axis movement）, thrust head（Y-axis movement on the slider） and slider（Z-axis movement on the head）. The rotary table of this center（located on the saddle） rotates around the B/C axes, which expands its functionality.
Carbide drill with a diameter of 5.4 mm for universal machining.
Features of Solid Carbide: Unique drill taper angle design and arc flank provide high versatility. The narrow ligament width and large reverse cone effectively prevent the ligament from heating up. Model：RC-P-030-0540 Diameter：5.4 Diameter：28 Total Length：66
Deep Hole Drilling Machine
High Quality Deep Hole Gun Drilling Machine RC2135 BTA Deep Hole Drilling and Boring Machine for Blind Hole
CK0620A Swiss CNC lathe
Swiss CNC Lathe CK0620A Small Precision CNC Lathe for Metalworking
VMC1055-High Precision Vertical Machining Center VMC1055
High efficiency（VMC1055）Traveling speed up to 48m/min and spindle up to 10,000rpm for fast and powerful milling. High precision Positioning accuracy ±0.008 mm, repeatability ±0.005 mm for consistent results. VersatilityWork table 1000x550 mm, capacity of 24 tools and support for long tools up to 300 mm.
VMC600-VMC600 High Precision Vertical Machining Center
1. High rigidity and stability HT300 cast iron and box structure provide excellent rigidity and long-term stability. 2. Precision and high speed Ball screws and linear guides guarantee accuracy up to ±0.008mm. Spindle with a maximum speed of 8000 rpm. 3. Convenient operation Automatic lubrication and protection of screws increases service life and reduces maintenance costs. These advantages make the VMC600 ideal for high-precision machining.
TCK50A CNC Tilt Bed Lathe
30° inclined bed design: Taiwan linear roller nut with preload, ±0.005mm accuracy, 25% higher chip ejection efficiency Spindle: P4 bearings + dynamic balancing, vibration ≤0.003mm, rigidity +20%, noise <65dB Hydraulic chuck: 10" wedge (standards JIS/TW), hardened surface, 100kN clamping forceRevolver: 8-dimension hydraulic (servo selectable), change time 0.2s, repeat accuracy ±0.002mm Transmission: Ball screw (Class C7), linear nut, speed 48m/min, feed accuracy ±0.003mm Automatic lubrication: Hegu (Japan), pressure control + adjustable cycleTailstock: Hydraulic, force up to 8 MPa, for heavy shaftsCNC: GSK988T (Siemens/Fanuc optional), combined processing, automatic compensation
HT6 - High Precision CNC Machine
Smart Manufacturing with HT6: High Speed, High Precision, High Reliability! 1. High precision and productivity Accuracy up to 0.005 mm and spindle speed up to 4500 rpm ensure excellent processing and productivity. 2. Multifunctional 12-position servo turret and hydraulic tailstock for processing parts up to 400 mm and length up to 550 mm. 3. Reliability and low costs Quality components and cooling systems reduce maintenance costs and increase durability.
MVL1690 High Precision Vertical Machining Center CNC Router Machining Center
MVL1690 vertical machining center is mainly used for parts and mold processing. After clamping the workpiece once, milling, drilling, boring, reaming and other processes can be carried out continuously. Parts can be processed on one machine or on several assembly lines. The advantages of the machine are high cutting force, high positioning speed, mechatronics, automatic chip removal, safety and ease of operation.
Vertical lathe VT600M
The VT600M is equipped with a resin cast iron bed with high rigidity and excellent vibration damping, as well as a high-torque 2500 rpm spindle and a 12-station BMT65 driven turret (quick tool change, rotation speed up to 3000 rpm), making it especially suitable for machining complex parts in the automotive industry, mold making and other machining applications. ① FANUC 0i-TF plus control system (10″ display) ② A2-8 main spindle with AC motor, drive power 15/18.5 kW, 2500 rpm ③ 12-position BMT65 servo turret ④ 12 driven tool stations ⑤ Chip conveyor and storage tank chips ⑥ Hydraulic closed cylinder
CK6140-750 CNC lathe: high precision machining with stepless speed control
CK6140-750 CNC lathe: the ideal choice for efficient and precise machining! The CK6140-750 CNC lathe offers unrivaled performance and precision that is ideal for a variety of machining applications, from steel and cast iron to copper and aluminum. With its infinitely variable spindle speed up to 3000 rpm, this machine can handle the most challenging machining tasks. With IT6-IT7 high processing precision, positioning X ≤ 0.03mm and Z ≤ 0.04mm, and positioning repeatability X ≤ 0.0075mm and Z ≤ 0.01mm, every project will be completed with perfect precision.
GMB2520LX Five-axis bridge gantry machining center
This machine is a portal-type bridge structure with a movable beam and fixed posts. It has a high rigidity base frame, symmetrical design and excellent stability. The machine uses an advanced international design concept taking into account dynamic rigidity, and also optimizes the design of moving parts, adding A/C servos. The machine spindle has high rotation speed and good fast response characteristics, which allows five-axis processing. The equipment is suitable for various machining fields, including automotive, mold making, metal products and other industries. The general layout of the machine is a bridge portal frame with a movable beam: the racks are rigidly fixed to the frame, which is made as a single unit with the work table; the beam is mounted on the posts and moves along the X axis, the slide moves along the beam in the direction of the Y axis, and the caliper moves along the slide in the direction of the Z axis.
Пожалуйста, оставьте нам сообщение
-
-
-
-
QR code for DRC business consultation on WeChat
