https://www.drcmachinery.ru/wp-content/uploads/WeChat_20241104140450.mp4

The DHM50 horizontal machining center adopts a positive T-shape structure. The main components are made of high-strength cast iron and heat treated. The three axes are equipped with Taiwan roller guides and ball screws. The BT50 spindle speed is 6000 rpm. FANUC 0i MF system of DHM50 horizontal machining center supports four-axis coupling, positioning accuracy 0.01mm, 24-position tool magazine for free tool selection, work table 500×500mm, load capacity 500kg, X/Y/Z axis stroke 750mm each, suitable for efficient machining in the fields of automotive, molds, etc.

1.Temperature To keep the machining accuracy of the machine within the standard range, it is necessary to ensure that the constant temperature is between 17-25°C and the temperature difference from the ground to the highest point of the machine is kept within ±2°C! Humidity Continuous: 75% or less (non-condensing) Short time: 95% or less (non-condensing) Altitude Below 1000m Installation Conditions To ensure high precision and performance of the equipment, the foundation should be made in strict accordance with the foundation map provided by the seller (refer to the foundation map for specific production requirements) The installation location of the equipment should be away from direct sunlight, sources of vibration (stamping equipment, automobile and railways, etc.) and heat sources (furnaces, heaters, radiation, etc.), away from high-frequency generators, welding machines, etc., to avoid machine production failure or loss of machine precision. Air source requirements Air supply pressure ≥ 0.6 MPa, and the filtration accuracy is 100 microns. Although the machine is equipped with an air filter, the source of compressed air should be as free from moisture as possible. To ensure the normal operation of the equipment, if the compressed air of the air source does not meet the requirements of the air source, it is recommended to add another set of air source purification device (drying, oil removal, filtration) before taking out the machine. Water content in the air source will cause damage to precision components such as spindles and grid scales (component damage caused by this reason is not covered by the warranty), which must be strictly controlled! Power supply 3-phase 380V±10%; 50H Z If the voltage in the area of ​​use is unstable, the machine must be equipped with a stable power supply to ensure the normal operation of the machine. Power requirements Power supply power 55 kVA Recommended power wire diameter: 25 mm2. Switching capacity: 160A   Grounding Good grounding is required, each machine is recommended to be grounded separately, the grounding wire is copper wire, the diameter of the wire should not be less than 10 square mm, and the grounding resistance is less than 4 ohms

DHM80 horizontal machining center equipped with FANUC 0i MF system, 0.001° high precision index table, 0.012mm positioning accuracy, 0.008mm repositioning accuracy, 6000rpm spindle speed. 40T tool magazine supports tools up to 25kg, positive T design with high strength cast iron parts and roller linear guides, rigidity and precision. Suitable for automotive, mold, equipment and other fields, supports four-axis coupling and multi-cycle processing, standard automatic lubrication, chip removal and other systems, provides professional training and perfect after-sales service, and ensures efficient and precise processing.

This machine is a bridge machining center with a portal (portal-bridge) structure. It has high rigidity of the base frame, symmetrical structure and excellent stability. The design adopts international advanced dynamic stiffness concepts, optimizes moving parts, and adds servo drives on the A and C axes. The machine spindle has a high rotation speed and excellent response speed, which enables high-precision five-axis continuous machining. The machine is intended for use in various industries, such as automotive, mold making, metalworking and other areas of mechanical engineering. The general layout of the machine is made according to the scheme of a bridge portal with a movable beam and fixed racks. The columns are rigidly fixed, the work table is installed permanently on the foundation. The cross member (beam) is fixed to the columns and moves along the X axis. The slide moves along the cross member along the Y axis, and the spindle head moves along the slide along the Z axis.

1, high rigidity, long-term preservation of precision 1.1, the main components of the machine: base, table, column, beam, slider, plunger are used in high-quality resin sand modeling, high strength quality cast iron, with ideal heat treatment process to eliminate residual stress, and the arrangement of sufficient reinforcement plate, to ensure that the whole machine has sufficient strength, rigidity and high stability. 1.2 The XY axis is equipped with heavy-duty roller guides, which have high rigidity and good dynamic precision. 1.3 The three axes drive adopts Taiwan brand large diameter double nut ball screws with compact structure, smooth movement and high precision. The screw support adopts precision screw support bearings, and both ends are pre-stretched to eliminate the loss of precision caused by thermal elongation.

This machine is a bridge machining center with a gantry structure. It has high rigidity base frame, symmetrical design and excellent stability. The design uses advanced international concepts of dynamic rigidity, optimized moving parts, and added servos on the A and C axes. The machine spindle is characterized by high rotation speed and fast response dynamics, which allows high-precision five-axis synchronous processing. The machine is suitable for various fields of mechanical engineering, including automotive, mold production, metal products and other areas of high-precision machining. The general layout of the machine is made according to the scheme of a bridge portal with a movable beam and fixed racks. The columns are rigidly fixed, the work table is installed permanently on the foundation. The cross beam is mounted on the columns and moves along the X axis. The slide moves along the cross beam along the Y axis. The headstock (plunger) moves along the slide along the Z axis.

This machine is a bridge structure with a portal frame. It has high rigidity of the basic structure, symmetrical structure and excellent stability. The machine adopts international advanced concepts of dynamic rigidity, optimized moving parts, and added servo drives on the A and C axes. The main spindle features high rotation speed and fast response, which enables five-axis synchronous machining. The machine is suitable for various fields of machining: automotive, mold making, aerospace, defense, metalworking, etc.

HME63 horizontal machining center is equipped with FANUC 0i MF 1 system, adopts inverted T-shaped structure with fixed base, work table which moves in X direction, column which moves in Z direction and spindle box which moves in Y direction. HME63 horizontal machining center has large torque, 6000 rpm spindle speed, three axes rapid traverse speed 20m/min, 0.01mm positioning accuracy, 0.006mm repositioning accuracy, 1° B-axis indexing and 24t tool magazine. Suitable for machining fields such as automotive, molds and equipment. It has high rigidity, high precision, fast response and high efficiency, providing reliable solutions for machining needs.