The CNC lathe spindle is equipped with a high-precision spindle bearing group that has been carefully assembled and dynamically balanced. This provides the CNC lathe with high precision, low noise and excellent rigidity, key benefits for efficient metalworking. The spindle design of a CNC lathe uses a worm gear, with the upper and lower toothed disks being meshed and also clamped by a screw. This system on a CNC lathe allows for rapid position changes, high positioning accuracy, and the ability to develop significant tangential torque—critical characteristics for a high-performance CNC lathe. To transmit the rotation signal to the spindle of a CNC lathe, a Hall sensor is used, which is characterized by a long service life - an important aspect for the reliable operation of a CNC lathe in long production runs.

① 45° inclined bed: Taiwan preload linear roller nut, chip ejection efficiency +30%, accuracy ±0.005mm② Spindle: High precision bearings + dynamic balancing, vibration ≤0.003mm, rigidity +25%, noise <65dB③ Hydraulic chuck: 8-inch wedge (JIS/TW standards), hardened surface, clamping force 80kN④ Turret: 8-size hydraulic (servo selectable), change time 0.2s, repeat accuracy ±0.002mm⑤ Transmission: Ball screw (C7), linear nut, speed 48m/min⑥ Automatic lubrication: RBCLB-3ZK, automatic circulation, constant lubrication⑦ Tailstock: Hydraulic, adjustable force, for precise machining of shafts⑧ CNC: GSK980TC3 (Siemens/Fanuc optional), combined machining

① 45° inclined bed design: Taiwan preload linear roller nut, positioning accuracy ±0.004mm, chip throwing efficiency +35%② High precision spindle: P4 bearings + dynamic balancing, vibration ≤0.002mm, rigidity +25%, noise <63dB③ Hydraulic chuck: 10" wedge (JIS/TW standards), hardened surface, clamping force 120kN④ Revolver: 8-size hydraulic (servo selectable), tool change time 0.15s, repeat accuracy ±0.0015mm⑤ Transmission: Ball screw (C5 quality), linear nut, travel speed 50m/min, feed accuracy ±0.002 mm⑥ Automatic lubrication: Hegu centralized system (Japan), pressure control + adjustable cycle⑦ Tailstock: Hydraulic, adjustable force up to 10 MPa, for processing heavy shafts⑧ CNC: GSK988T standard (Siemens/Fanuc optional), support for combined machining, AI tool compensation

  About the company Quality assurance / Worldwide recognition / High technology DRC machinery -...

① 30° inclined bed: Taiwan linear roller nut with preload, smooth chip ejection, for high-speed precision machining② Spindle: Precision assembly + dynamic balancing, low noise, high rigidity and stability③ Hydraulic chuck: 8-inch hydraulically driven wedge, quick clamping, accuracy ±0.01 mm④ Revolver: 8-size electric (hydraulic/servo selectable), changeover time 0.2s, repeat accuracy ±0.002mm⑤ Transmission: Ball screw (constant temperature treatment), linear nut, speed 48m/min⑥ Automatic lubrication: Japanese Hegu system, pressure control + automatic circulation⑦ Tailstock: Hydraulic, manual/automatic control, for shaft processing⑧ CNC: GSK980TC3 (Siemens/Fanuc optional), support turning and milling

Swiss lathe RC206, spindle runout ≤ 0.002mm, repeat positioning accuracy ≤ 0.003mm, maximum speed 10000rpm, adopts FANUC/SYNTEC system, eight-axis communication, can perform turning, milling, drilling and tapping in composite materials. Swiss lathe RC206 uses Meehanite cast iron body + imported NSK bearings/Hiwin guides, flexible guide bushing/no guide bushing mode switching, suitable for precision processing of φ20mm bar stock, international quality parts, ensures 7×24 hours continuous production, and provides efficient solutions for precision manufacturing.

Swiss lathe RC325: spindle runout ≤ 2 μm, repeatability ≤ 3 μm, 4.5 kW spindle, FANUC/SYNTEC system, supports 8-axis connection and continuous C index positioning, speed 6000 rpm. Swiss lathe RC325 can flexibly switch between guide bushing/no guide bushing modes, with a maximum bar diameter of Φ32mm and a radial force tool of 4500rpm, suitable for turning, milling, drilling and tapping. The RC325 Swiss lathe can be equipped with various configurations such as bar feeder to ensure precise machining.

30° inclined bed design: Taiwan linear roller nut with preload, ±0.005mm accuracy, 25% higher chip ejection efficiency Spindle: P4 bearings + dynamic balancing, vibration ≤0.003mm, rigidity +20%, noise <65dB Hydraulic chuck: 10" wedge (standards JIS/TW), hardened surface, 100kN clamping forceRevolver: 8-dimension hydraulic (servo selectable), change time 0.2s, repeat accuracy ±0.002mm Transmission: Ball screw (Class C7), linear nut, speed 48m/min, feed accuracy ±0.003mm Automatic lubrication: Hegu (Japan), pressure control + adjustable cycleTailstock: Hydraulic, force up to 8 MPa, for heavy shaftsCNC: GSK988T (Siemens/Fanuc optional), combined processing, automatic compensation

① A2-11 main spindle with AC motor, drive power 18.5/22 kW, 1500 rpm② 12-position servo turret③ Chip conveyor and chip tank④ Hydraulic closed cylinder⑤ FANUC 0i-TF plus control system