MVL1690 vertical machining center is mainly used for parts and mold processing. After clamping the workpiece once, milling, drilling, boring, reaming and other processes can be carried out continuously. Parts can be processed on one machine or on several assembly lines. The advantages of the machine are high cutting force, high positioning speed, mechatronics, automatic chip removal, safety and ease of operation.

1.Temperature To keep the machining accuracy of the machine within the standard range, it is necessary to ensure that the constant temperature is between 17-25°C and the temperature difference from the ground to the highest point of the machine is kept within ±2°C! Humidity Continuous: 75% or less (non-condensing) Short time: 95% or less (non-condensing) Altitude Below 1000m Installation Conditions To ensure high precision and performance of the equipment, the foundation should be made in strict accordance with the foundation map provided by the seller (refer to the foundation map for specific production requirements) The installation location of the equipment should be away from direct sunlight, sources of vibration (stamping equipment, automobile and railways, etc.) and heat sources (furnaces, heaters, radiation, etc.), away from high-frequency generators, welding machines, etc., to avoid machine production failure or loss of machine precision. Air source requirements Air supply pressure ≥ 0.6 MPa, and the filtration accuracy is 100 microns. Although the machine is equipped with an air filter, the source of compressed air should be as free from moisture as possible. To ensure the normal operation of the equipment, if the compressed air of the air source does not meet the requirements of the air source, it is recommended to add another set of air source purification device (drying, oil removal, filtration) before taking out the machine. Water content in the air source will cause damage to precision components such as spindles and grid scales (component damage caused by this reason is not covered by the warranty), which must be strictly controlled! Power supply 3-phase 380V±10%; 50H Z If the voltage in the area of ​​use is unstable, the machine must be equipped with a stable power supply to ensure the normal operation of the machine. Power requirements Power supply power 55 kVA Recommended power wire diameter: 25 mm2. Switching capacity: 160A   Grounding Good grounding is required, each machine is recommended to be grounded separately, the grounding wire is copper wire, the diameter of the wire should not be less than 10 square mm, and the grounding resistance is less than 4 ohms

CMV1160 High Performance 4 Axis CNC Vertical Milling Center Select large size motor to ensure efficient equipment performance. Dustproof bearing guide rod design increases service life. Optimize tool magazine protection to improve maintainability.

① 45° inclined bed design: Taiwan preload linear roller nut, positioning accuracy ±0.004mm, chip throwing efficiency +35%② High precision spindle: P4 bearings + dynamic balancing, vibration ≤0.002mm, rigidity +25%, noise <63dB③ Hydraulic chuck: 10" wedge (JIS/TW standards), hardened surface, clamping force 120kN④ Revolver: 8-size hydraulic (servo selectable), tool change time 0.15s, repeat accuracy ±0.0015mm⑤ Transmission: Ball screw (C5 quality), linear nut, travel speed 50m/min, feed accuracy ±0.002 mm⑥ Automatic lubrication: Hegu centralized system (Japan), pressure control + adjustable cycle⑦ Tailstock: Hydraulic, adjustable force up to 10 MPa, for processing heavy shafts⑧ CNC: GSK988T standard (Siemens/Fanuc optional), support for combined machining, AI tool compensation

1. Rigidity and stability HT300 cast iron and ribbed design ensure high rigidity and precision. 2. Precision and performance Ball guides and servo motors ensure accuracy up to ±0.008 mm and high feed speed. 3. Environment-friendly and maintenance Automatic lubrication and oil-water separator increase service life and protect the environment. The VMC640 is the optimal solution for precise and efficient machining.

The MVL1270 vertical machining center is mainly used for processing medium-sized parts and molds. After one clamping, the workpiece can continuously carry out the processes of milling, drilling, boring, reaming, etc. It can process parts on one machine or on multiple assembly lines. It has the advantages of large cutting force, high positioning speed, mechatronics, automatic chip removal, safety protection and easy operation.

DHM80 horizontal machining center equipped with FANUC 0i MF system, 0.001° high precision index table, 0.012mm positioning accuracy, 0.008mm repositioning accuracy, 6000rpm spindle speed. 40T tool magazine supports tools up to 25kg, positive T design with high strength cast iron parts and roller linear guides, rigidity and precision. Suitable for automotive, mold, equipment and other fields, supports four-axis coupling and multi-cycle processing, standard automatic lubrication, chip removal and other systems, provides professional training and perfect after-sales service, and ensures efficient and precise processing.

This machine is a bridge machining center with a portal (portal-bridge) structure. It has high rigidity of the base frame, symmetrical structure and excellent stability. The design adopts international advanced dynamic stiffness concepts, optimizes moving parts, and adds servo drives on the A and C axes. The machine spindle has a high rotation speed and excellent response speed, which enables high-precision five-axis continuous machining. The machine is intended for use in various industries, such as automotive, mold making, metalworking and other areas of mechanical engineering. The general layout of the machine is made according to the scheme of a bridge portal with a movable beam and fixed racks. The columns are rigidly fixed, the work table is installed permanently on the foundation. The cross member (beam) is fixed to the columns and moves along the X axis. The slide moves along the cross member along the Y axis, and the spindle head moves along the slide along the Z axis.

Machine design features: 1. Three-axis movement Vertical machining center MVL 1165 It is carried out using ground ball screws with double nut from Taiwan brands. 2. High rigidity spindle BT50 Vertical machining center MVL 1165 Manufactured by Taiwanese brands. The spindle rotation speed reaches 6000 rpm. The maximum travel speed on three axes is 36/36/16 m/min. 3. Ergonomics and aesthetics Vertical machining center MVL 1165 The machine is equipped with a completely closed protective casing. Two longitudinal screw conveyors are built into the outer guard, making it easier to remove chips.