DRC CT5: 4-axis universal FANUC CNC turning – high-precision machining for industry
2025-12-09
In modern precision machining, the key to success is choosing equipment that combines precision, performance and reliability. DRC presents innovative 4-axis universal turning equipment CT5 is an intelligent solution for the integral machining of complex parts, equipped with the top-of-the-line FANUC 0i-TF PLUS CNS, inclined Y-axis, 12-position BMT55 servo-revolver and integrated auxiliary spindle. The equipment is ideal for mass production of automotive parts, aerospace components, precision instruments and electronic components, ensuring high quality products and reduced production times.
I. Key technical features of the DRC CT5 4-axis turning center
1. Premium CNS FANUC 0i-TF PLUS: intelligent processing control
Turning equipment DRC CT5 standard equipped with legendary CNS FANUC 0i-TF PLUS - a leader in the market of control systems for CNC machines. The 10.4" high-quality MGi display provides easy access to all parameters, while support for metric and inch input systems (0.001mm accuracy) adapts the equipment to any production requirement. The system includes onboard storage for 250 tool data sets, 5,000-step PLC program (expandable to 24,000 steps), and 2GB external storage with USB 2.0 and Ethernet interfaces—allowing for rapid program transfer and batch control. Thanks to the minimum block cycle time (1.5 ms) and compensation functions (cutting radius G40/G41/G42, screw pitch, backlash), the DRC CT5 guarantees precision machining of complex contours even at high speeds.
2. 4-axis binding + inclined Y-axis: limitless processing possibilities
IV. Applications and benefits of the DRC CT5 turning equipment
Main advantage universal turning center DRC CT5 - support for 4-axis X/Y/Z/C linkage, enhanced inclined Y axis with a stroke of ±45 mm. This opens up possibilities for multi-dimensional processing: complex spatial surfaces, inclined grooves, tapered and multi-pass threads. Wide axis strokes (X - 185 mm, Z - 550 mm) and high rapid traverse speeds (24/12/24 m/min for X/Y/Z) significantly reduce non-machining time, increasing overall productivity by 30% compared to competitors. The C-axis with a speed of 100 rpm and a torque of 110 Nm provides precise workpiece positioning for complex operations.
3. High-strength construction and highly dynamic spindles: stable under load
bed turning center DRC CT5 Made of high-quality cast iron with a 45° slope - this ensures excellent thermal stability, resistance to torsion and vibration, even during long-term intensive work. All axes feature linear guides and pre-tensioned recirculating ball screws, and the four-way design prevents collisions when moving the shank. Main spindle A2-6 with a powerful 17.2 kW drive, it develops a maximum torque of 110 Nm and a speed of 4500 rpm, easily coping with the processing of high-hardness materials. Built-in auxiliary spindle A2-5 (power 11 kW, speed 5000 rpm, stroke 490 mm) allows continuous machining of both ends of a part in one clamp, reducing positioning errors and production time.
4. BMT55 12-position turret: efficient tool change and versatility
Turning equipment DRC CT5 equipped with standard 12-position servo-revolver BMT55 - a universal solution for integrated processing. The turret supports 12 driven tool positions, is compatible with □25mm and Ø40mm tool holders, and the positioning time at 30° indexing is only 0.35 seconds (with locking) or 0.12 seconds (without locking). Thanks to the standard BMT55 interface, it is possible to connect 0°/90° drive holders (optional), allowing you to perform turning, milling, drilling, tapping and grooving in a single cycle. A wide range of cyclic functions (margining, finishing, deep drilling, thread processing) makes the DRC CT5 universal for solving any production tasks.
II. Technical parameters of turning center DRC CT5
| Category | Key parameters |
|---|---|
| Processing range | Swing over the bed: 550 mm; Maximum turning diameter: 300 mm; Maximum processing length: 400 mm |
| Positioning accuracy | X/Y/Z axes: ≤6/8/8 µm; C-axis: ≤20 arcsec; Repeat positioning accuracy (X/Y/Z): ≤4/5/5 µm |
| Spindle system | Main spindle: 17.2 kW / 4500 rpm / 110 Nm; Auxiliary spindle: 11 kW / 5000 rpm |
| Revolver characteristics | 12-position BMT55; Power of driven tools: 2.7 kW; Maximum speed: 4000 rpm |
| Assistance systems | Coolant tank volume: 180 l; Hydraulic pressure: 50 bar; Pneumatic pressure: 6 bar |
| General characteristics | Net weight (with chip remover): ~4200 kg; Dimensions (L×W×H): 4520×2250×2150 mm |
III. Standard equipment and additional options for the turning center
[Standard]
[Additional options]
IV. Applications and benefits of the DRC CT5 turning equipment
Applicable Industry
Key benefits of DRC CT5
V. Why choose DRC CT5 turning center?
4-axis universal turning equipment DRC CT5 is the result of a fusion of innovative technologies and practical experience in the field of high-precision machining. The equipment is designed to solve complex production problems, increase efficiency and reduce costs. With the combination of the FANUC 0i-TF PLUS CNS, inclined Y-axis, powerful spindles and the versatile BMT55 turret, the DRC CT5 becomes a key element of modern production, providing a competitive advantage in the market.
Пожалуйста, оставьте нам сообщение
-
-
-
-
QR code for DRC business consultation on WeChat
